Product introduction

Grass Green electrostatic catering oil fume purifier, which was launched on the market in 2012, has undergone many upgrades and has been successfully used in thousands of catering oil fume purification projects.

This product is an economical catering oil fume purifier specially launched for wholesale agents. The purification efficiency is 90% and 97%, and the purification effect is up to standard. It can be discharged directly at low altitude or high altitude according to needs.

Application field

Canteens, restaurants, high-end residential areas, food cities, pedestrian streets, villa areas, scenic spots, commercial complexes, airports, station waiting rooms, golf courses, hot pot restaurants, barbecue restaurants, Sichuan and Hunan cuisine, local cuisines, fast food restaurants It can be used in environments with strict requirements on oil fume and odor.

For example, fried chicken, stir-fry, barbecue, barbecue, oil-pressed food production process will produce a lot of harmful gases, posing a health threat to chefs and catering staff. 

Our product advantages

1. The internal filter movement is made of stainless steel + aluminum.

2. Although the electrostatic fume purifiers of many manufacturers are based on the principle of high and low pressure purification, each has a different design concept. The distance between the high-voltage discharge areas of our equipment is 8mm, the sawtooth discharge, the number of discharge points is large, the discharge is uniform, and the breakdown effect of oil fume is good. The length of the low-pressure adsorption zone is 260mm. Compared with the design of similar products whose low-pressure adsorption zone is 160mm in length, our equipment has a better adsorption effect on negatively charged particles.

3. The insulator is made of 99 fine porcelain imported from Japan. The ceramic density is high, which avoids the breakdown or burning of the ceramic caused by poor insulation or high temperature resistance of the insulator, and minimizes the failure rate of the equipment. At the same time, the surface of this insulator is high. , Easy to clean, oil stains are not easy to stick, corrosion resistance.

4. Using imported components, the service life is more than 5 years.

5. The high-voltage generator power supply is independently developed and designed by the company. The power supply is a steady-state bipolar power supply. The voltage of the ionization section is DC 12000V, and the dust collection section is DC 6000V to achieve higher purification efficiency.

6. It has the function of opening the door and powering off. The internal use of alloy stainless steel spring is used to connect electricity, with good electrical conductivity. Compared with similar products, the design of general wire connection is safer, and it is not easy to generate electricity in series, and it is not easy to cause the danger of electric shock. Open the door and power off, and there is no open wire inside, which can increase the product life while protecting the safety of users.

7. The electrode contact point is made of pure copper material, which has better conductivity, ensures voltage stability, and has a longer service life; it has obvious advantages over most manufacturers using galvanized iron sheet and aluminum sheet material.

8. The sealing part is formed by one-time foam rubber, there is no connection gap, and the sealing performance is better, which can better protect the internal structure of the equipment and electrical components.

Fume Separate Principle

The first stage: 

Grass Green uses positive ionization technology to generate corona and release cations through a voltage of more than 6,000 volts. The cations hit air molecules to generate more cations and form an avalanche effect.

The second stage: 

After being far away from the corona area, the cations will be adsorbed by the surrounding air molecules, so that the gas molecules will be positively charged and move to the negative plate under the action of a strong electric field.

The third stage: 

The fine particles will block the flight of the positively charged air molecules and stick them together, so that the fine particles will carry a sufficient amount of positive charges.

The fourth stage: 

the positively charged fine particles move to the negative plate under the action of the electric field force of the dust collector, and are firmly adsorbed by it. The negative plate needs to be cleaned and recovered after adsorbing a thick layer of ash.

Installation for reference:  

Out Door installation

Room Installation