Yesterday, a knowledgeable middleman (a person in the industry) called for consultation. He asked a question: Is it possible for a meltblown cloth manufacturer to use a pure high-voltage electrostatic fume purifier to deal with the oily waste gas of more than 200 degrees produced by the setting machine? I thought this question was very strange, so I asked him if he had taken our goods, but now there is a problem. He said no. After careful inquiries, it turns out that he learned our solution from the information we published online the year before last, and then bought a few thousand yuan from somewhere in Shandong that looked similar to our home and installed it. It's been a little over a year since it burned down.

In fact, the information we disclosed at the time was no problem. Our treatment of stereotyped oil fume exhaust gas is indeed based on pure high-voltage electrostatic oil fume purifiers, but we can use this process, but other equipment may not be able to do it. Mainly in two points:

First, the structural design of our pure high-voltage electrostatic fume purifier is different from that of other homes. When I mentioned this, the caller agreed. He already knew this when he consulted us two years ago, and he still has it. impression;

Second, when we deal with the high-temperature oil fume of the setting machine, we must first do pretreatment and use a combined treatment process.

Specifically, our pure high-voltage electrostatic modules are different from their counterparts in at least 5 aspects in practical applications:

Regardless of whether the box is carbon steel or stainless steel, the pure high-voltage electrostatic module is designed to be made of stainless steel, which requires higher material cost and mold cost, but after years of engineering practice, we think it is worthwhile, and it is worthwhile for industrial working conditions. Applicability is also stronger.

Each pure high-voltage electrostatic module has 12,000 discharge points, which is more than twice that of similar products

Each pure high voltage electrostatic module has 3 levels of sawtooth discharge, 1 level more than similar products. When the exhaust gas enters the first discharge area, the high-voltage ionization crushes the exhaust gas and makes it electrified, and is adsorbed on the adjacent substrate, and the remaining fine exhaust particles enter the second discharge area and are purified by the same principle. The remaining extremely fine exhaust particles enter the third row of saw teeth.

Standard configuration, each 5000-6000 air volume machine is equipped with 2 sets of pure high-voltage electrostatic modules

When used in complex working conditions such as high temperature, water content, and fire, it must be combined with other equipment to form a composite treatment process. The security of the system has always been our primary concern

We chatted a lot on the phone, and later he mentioned that the burning of the machine should also be related to the low frequency of cleaning by end users. At the beginning of the installation, he emphasized that cleaning is required for every shutdown, but in fact the user only cleans it once a year, which is indeed a big problem. At present, there is no more suitable treatment process than electrostatic treatment in the industry to deal with oily fume and oily waste gas. However, the disadvantage of electrostatic equipment is that it needs to be cleaned regularly. If it is not cleaned for a long time, a large amount of oil adsorbed by the equipment will be concentrated on the plate, and it may ignite if it encounters high temperature or a small amount of ignition. In order to better solve this problem, we adopt the method of regular reminders and regular door-to-door maintenance. This method is more labor-intensive, but it is in line with our concept of "keep the equipment running stably for many years". Through guaranteed after-sales service, together with users, we help equipment maintain good performance and help us establish a more stable market foundation.